Combination Smoke and Carbon Monoxide Detector with AA replace Battery Operated Smoke CO Alarm Detector
About this item:
1. Complies with all current 10 year legislation in U. S. states/cities where required
2. Features electrochemical Carbon Monoxide sensing technology and photoelectric smoke sensor optimized to detect larger smoke particle produced by smoldering fires; helps minimize the number of false alarms
3. A loud 85 decibel alarm sounds when Carbon Monoxide, and Smoke levels begin to rise
4. Features a sleek, low profile design to blend more fully into the wall and out of sight
5. 3-year limited ; equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for your safety
6. Faster turnarounds on job sites with the easy-to-install, most-trusted alarms in home safety
Specification:
| Product name | Combination Smoke and Carbon Monoxide Detector with AA replace Battery Operated Smoke CO Alarm Detector |
| CO sensitivity | 50ppm: 60-90min
100ppm 10-40min
300ppm<3min |
| Product size | 120*28.5m |
| Alarm Volume | >85 dB(A) at 3 meters |
| Alarm Sensitivity | 0.09 - 0.17 dB/m |
| Battery | DC 2*1.5V AA Alkaline |
| Low Battery | 2.6 ± 0.1 V |
| Operation Current | <10uA (standby); <70mA (alarm) |
| Silence Time | approx. 10 minutes |
| Comply to Standard | EN14604:2005/AC:2008 EN50291:2010 |
Silence Mode
During the unit is alarming, you can push the test button,it will be paused the unit alarming for approx 10minutes. The red LED will flash once every 8seconds,it indicates the smoke alarm device is running into the silence mode. The silence feature is to be used only when a known alarm condition,such as smoke from cooking activates the alarm . The smoke alarm devicewill automatically reset after approximately 10minutes,if after this period,particles of combustion are still present ,the alarm will sound again .
CAUTION :
Before using the alarm silence (silence), identify the source of the smokeand be certain a safe condition exists .
Replaced Battery:
1. The low battery signal can last for maximum 30days, please replacethe batteries in time to keep it working properly.
2. Battery required:standard 1.5VAA batteries.
3. Correctly install the positive and negative poles of the battery(+&-)Waste batteries should not be placed into any household waste orrecycling bin as all of them have the potential to spark. Check with yourLocal Authority for recycling advice.
Test your Alarm
Test the unit to ensure proper operation by pressing the cover,the alarm will sound if the unit are working well. If no sounds, you can refer to“Trouble shooting”section for solution.
ACAUTION:
1. DO NOT test your alarm using an open flame. This may damage the smoke alarm, or ignite combustible materials and start a structural fire.
2. DO NOT stand close to the alarm when the alarm is sounding.
Mounting Alarms
1. Twist off the mounting bracket from the alarm .
2. Put the bracket on the installation position and mark the screw holes on the celing or the wall.
3. Drill two mounting holes in the marked place by an electric drill( The diameter of the drill hole is 5mm) and insert two plastic anchor plugs by hammer .
4. Screw the mounting bracket to the ceiling or the wall
5. Attach the alarm to the mounting bracket and turn clock wise to lock the alarm
6. If you have any question on installation, please contact your retailer .
WARNING : The installation instructions must be followed strictly incase of any injury .
Package List:
1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
Qty:50pcs/ctn
Size:39.5*34*32.5cm
G.W:10kg/ctn
FAQ
Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.
|
|
Combination Smoke and Carbon Monoxide Detector with AA replace Battery Operated Smoke CO Alarm Detector Images
|
